A1, A2 and B: navigation time and rest time
How many hours you may navigate per 24 hours determines how long a voyage takes. On a Rhine voyage of seventy-five hours of navigation, continuous navigation saves more than two days over daytime navigation. That is why /route shows the arrival time for all three operating modes.
The three operating modes
| Mode | Navigation per 24 hours | Navigation interrupted | Rest per crew member |
|---|---|---|---|
| A1 — daytime navigation | a maximum of 14 hours | 8 consecutive hours, between 22.00 and 06.00 | Eight hours of uninterrupted rest outside navigation time, within each period of 24 hours. |
| A2 — semi-continuous navigation | a maximum of 18 hours | 6 consecutive hours, between 23.00 and 05.00 | Eight hours of rest, six of them uninterrupted outside navigation time, within each period of 24 hours. |
| B — continuous navigation | a maximum of 24 hours | not prescribed | 24 hours of rest within each period of 48 hours, including at least two periods of six uninterrupted hours. |
Navigation time and interruption: Article 18.01 of the Rhine Navigation Personnel Regulations (RPN). Rest time: Article 18.02 of the same regulations. The link goes to the Dutch text. The table rows follow the CCNR's English wording as closely as we could, but they are our translation from Dutch; the official text prevails.
Two things we deliberately leave out
The extension in A1. Article 18.01, paragraph 2, allows navigation to be extended to sixteen hours once per calendar week — but only with a tachograph that meets the requirements of ES-TRIN and with, besides the boatmaster, another crew member holding a helmsman's certificate of qualification. We do not know those two conditions, and an arrival time that is too early helps nobody.
Departing from the time periods. The hours between 22.00 and 06.00 (A1) and 23.00 and 05.00 (A2) may be departed from if navigation time is recorded by a properly working tachograph. The number of hours stays the same, so it makes little difference to the arrival time; it does to where you lie at night.
Where the navigation time itself comes from
The hours above say how long you may navigate per 24 hours. How long the voyage takes is another question, and it is answered from two sources — for each part of the voyage the source that knows something about it.
Off the Rhine: 15 km/h from us, locking time from EuRIS
This page used to say that EuRIS has official speeds per waterway on the Belgian and German canals and that its figure is better than ours there. That is not true, and it was checked on these 15 voyages in the Netherlands, Germany and Belgium: its navigation time is each time exactly the distance divided by the speed wé give it (15 km/h), plus an allowance per lock of twenty to sixty-five minutes.
That 15 km/h can be replaced by your own speed: under your vessel on /route you enter your speed over ground on a canal, and upstream and downstream on the Rhine. The arrival time then uses it, with the locking time from EuRIS added, and the figure says it comes from you.
| Voyage | Km | Locks | EuRIS (h) | Distance/15 (h) | Min/lock |
|---|---|---|---|---|---|
| Rotterdam–Duisburg | 216.8 | 0 | 14.47 | 14.45 | — |
| Rotterdam–Keulen | 306.3 | 0 | 20.44 | 20.42 | — |
| Rotterdam–Hamm | 279.1 | 6 | 20.63 | 18.61 | 20 |
| Rotterdam–Maastricht | 235.4 | 8 | 21.52 | 15.69 | 44 |
| Amsterdam–Utrecht | 42.5 | 1 | 3.88 | 2.83 | 63 |
| Utrecht–Tiel | 33.4 | 2 | 3.62 | 2.23 | 42 |
| Nijmegen–Venlo | 71.9 | 2 | 6.97 | 4.79 | 65 |
| Gorinchem–Den Bosch | 36.1 | 3 | 4.91 | 2.41 | 50 |
| Wesel–Marl | 40.1 | 3 | 3.67 | 2.67 | 20 |
| Duisburg–Dortmund | 60.6 | 6 | 6.04 | 4.04 | 20 |
| Duisburg–Hamm | 86.5 | 5 | 7.43 | 5.77 | 20 |
| Koblenz–Trier | 187.3 | 8 | 15.15 | 12.49 | 20 |
| Mainz–Würzburg | 251.6 | 20 | 23.44 | 16.77 | 20 |
| Antwerpen–Gent | 100.9 | 2 | 7.75 | 6.73 | 31 |
| Antwerpen–Luik | 133.0 | 7 | 14.36 | 8.87 | 47 |
That the official Belgian speeds are not in it can be seen separately by replacing 15 with 60: Antwerpen–Luik then goes from 14.36 to 14.29 hours. The cap on that waterway is therefore around 15.1 km/h and never binds at 15. Across all 15 voyages that cap lies between 15.1 and 16.9 km/h.
Off the Rhine, the moving part of the navigation time is therefore ours and only the locking comes from EuRIS. On /route the two are therefore shown separately. Nóthing is added for locking — that would count it twice, because it is already in its figure.
What does not exist: a source with speeds actually sailed per waterway. The kilometre markers of NWB Vaarwegen give waterway sections without a speed, the RWS dataset of maximum dimensions is about dimensions, and a legal speed limit is an upper bound, not a travel time. That is why it says 15 km/h, marked as an assumption, rather than a figure that looks more precise than it is.
On the Rhine: our own navigation times
EuRIS has no official speeds for the Rhine. It calculates there with the speed we send it and knows no current, so upstream and downstream take equally long — which does not match the river. The Rhine part is therefore calculated with our own navigation times. Upstream is given per river section; downstream on free-flowing water is one band speed for the whole Rhine, because it has not been given per section.
The locking time of the Rhine part is included in those navigation times, so it is not taken from EuRIS a second time. That used to be done by subtracting from its total what the Rhine kilometres cost, and that goes wrong as soon as there are locks on that part: above Iffezheim there are nine. On Basel–Marl this put 8.28 hours of locking time on 38.4 km of Wesel-Datteln-Kanal with three locks, where one hour belongs. Now the total locking time is spread over the locks EuRIS itself counts, and only those outside the Rhine part count.
| Section | Km | Up, laden | Up, empty | Down, laden | Down, empty | Origin |
|---|---|---|---|---|---|---|
| Rotterdam – Lobith | 138 | 16.1 h | — | 7.1 h * | — | estimate by a boatmaster |
| Lobith – Duisburg-Ruhrort | 82 | 7.9 h | — | 4.2 h * | — | estimate by a boatmaster |
| Duisburg-Ruhrort – Koblenz | 188 | 20.1 h | — | 9.6 h * | — | estimate by a boatmaster |
| Koblenz – Sankt Goar | 36 | 3.9 h | — | 1.8 h * | — | estimate by a boatmaster |
| Sankt Goar – Karlsruhe | 197 | 21.0 h | — | 10.1 h * | — | estimate by a boatmaster |
| Karlsruhe – Iffezheim · 1 lock | 25 | 3.0 h | — | 4.0 h | — | estimate by a boatmaster |
| Iffezheim – Basel · 9 locks | 166 | 20.0 h | — | 14.0 h | — | estimate by a boatmaster |
| Basel – Birsfelden · 1 lock | 5 | 1.0 h | — | 1.0 h | — | estimate by a boatmaster |
Together 837 km in 93 hours upstream laden — on average 9.0 km/h against 16.1 km/h downstream.
* This downstream time is not given per section but follows from the band speed at normal water level (19.5 km/h) — one speed for the whole free-flowing Rhine, so there downstream is nót per river section. The 3 impounded sections above Karlsruhe do have a fixed time, with locking included.
The dashes are not zero but a blank: not a single figure has been given yet for sailing empty — 8 of the 8 sections lack upstream empty and 8 downstream empty. In practice, load changes your speed more than your dimensions do, but inventing a factor is exactly what this site does not do. Until they exist, an empty voyage is calculated with the laden time, and /route says so. The places are already there, so they can be filled in without the calculation changing — and the calibration fills them by itself once empty voyages have been measured.
Why it says "estimate by a boatmaster", and what changes that
All eight sections above rest on figures given by one boatmaster: upstream laden at normal water level, over four stretches. Within such a stretch the existing ratio was kept and scaled to that figure with one factor — that is a choice, not a measurement, because the distribution wíthin a stretch has not been given.
They are meant to be replaced. Anyone using the daily report measures without doing anything for it: every voyage gives a sailed time per section. As soon as a combination — section, direction, load, water level — has 5 passages, the median of the last 24 takes over from the estimate. Median and not mean: one voyage with a day of lock failure skews a mean. In this table the origin then changes with it, so you can see which figure you are looking at.
What the arrival time on /route actually is
The navigation time above, with the clock added: the vessel navigates as soon as it may, and at most the permitted number of hours per 24 hours. Where the remaining hours of the day fall is the boatmaster's choice — it makes no difference to the arrival time.
It is an estimate for your planning, not a check of navigation and rest times. At high or low water it drifts, and what was actually navigated is in the logbook and on the tachograph — those are on board. Not official navigational advice.
Keep track yourself: the crew planner
Who on board is working and resting, whether the crew meets the minimum crew of Article 19.02 and whether the rest times of Article 18.02 are met — you keep track of that in the crew planner. The data stays on your own phone; there is no account.